Euro EUR 20.1673
Dolar S.U.A. USD 17.0468
Rubla ruseasca RUB 0.2217
Leu romanesc RON 4.1385
Hrivna ucraineana UAH 0.6030

With a reinforced concrete platform Max-30t

An advanced engineering design of Alex S&E Company – modular truck scales with a reinforced concrete platform


The scales are meant for static weighting of motor transport with complete vehicle getting to the platform, including vehicles for liquid and bulk cargo. The scales comply with GOST 29329 and are entered in the State Register.


This structure is recommended for application at the enterprises with severe operation conditions, such as open-cut mining, concrete goods manufacture, ready-mix station, mining and processing complexes, scrap metal recycling companies, etc.

 The reinforced concrete platform, total weight up to 40 tons, and compressive load-measuring devices practically exclude the influence of incidental factors and provide the weighing stability in any weather environment.

The scales design guarantees safety and long life of the weighing system as a whole, the three-module platform provides equal distribution of load among the load cells, and the platform deformation level is maintained at a minimum level.

The loading platform of scales consists of one or some modules connected together, it allows achieving the necessary platform length from 6 up to 18 m.

The reinforced concrete module may be 4.5 or 6 meters long.

The scales platform is supplied in two variants:

  1. Reinforced concrete modules;
  2. Frame with reinforcing mesh for concrete casting at the place of installation

The CUSTOMER shall perform the work of concrete casting of foundation and platform at its own discretion.


The electronic indicator unit MERAV 2000 has an RS 232 interface for connecting to a personal computer.

If it is necessary to control signal lights, barriers, loading mechanisms and other additional equipment in the automatic mode the weighing controller MERAV 3001 meant for the work as a component part of various weighing system on the basis of truck scales is used.

The automated zero adjustment is provided at all types of scales. For regulating the control of goods transporting by motor vehicles through a weighing station, the scales are equipped with special software installed in the personal computer, having a possibility of adjustment to the specific CUSTOMER requirements.


  • Remote indicating display panel;
  • Signal light and barrier system;
  • Scales control and remote registration of weighing without an operator;
  • System of registering an image of vehicle being weighed;
  • Internal power supply.
  • Additional Info
  • Image Gallery

Additional Info

Maximum capacity, t: 30/60 / 80
Minimum capacity, kg: 200 / 400
Verification scale interval (е), kg: 10/20 / 20
Actual scale interval (d), kg: 10/20 / 20
Number of sensors, pcs: 3
Load weighing platform length, m: 16 / 18
Number of sensors, pcs: 8
Dust and waterproof (platform): IP 68
Dust and waterproof (indicator): IP 67
Dust and waterproof (controller): IP 54
Operation temperature range (indicator), С: from -30 to +45
Operation temperature range (indicator), С: from -5 to +35
Power supply: 220V(+10%;-15%); 50 Hz +/-2%
Accuracy class: Medium (III)


Prev Next



Alex S&E company

Alex S&E

Alex S&E

“Alex S&E” is the biggest manufacturer and distributor of weighing equipment for industry and commerce in the Republic of Moldova. Since 1993, we produce commercial scales, dosing systems and automated accounting systems for industrial and trade applications. Nowadays “Alex S&E” is one of the largest engineering companies in Moldova and other CIS countries.


Moldagrotech 2016

Alex S&E

Alex S&E



Go to top